FRP Stair Nosing and FRP complete Stair Treads

FRP stair nosing which is designed to minimise slipping, tripping and at the same time highlighting the step edge in many profiles.

FRP stair nosing are a safety product necessary for the Industrial, Marine and Mining sectors. They are an essential for those workers and staff who use stairs, ramps and platforms in their normal everyday work environment. It is also critical where stairs are that are primarily used for escape stairwells in the case fire and emergency that these robust FRP stair nosing are used.

Reinforced SC-R 70 Anti Slip Stair Nosing
Quick and easy to install. SC-R 70 anti slip nosing is designed to minimise slipping, tripping and at the same time highlighting the step edge.
Size: SC-R 70mm x 25mm x up to 3600mm long

** Now available in a 10mm profile

Installation of Stair Nosing

    Chequered Plate / Steel: Glue & Screw with TEK Screws
    Concrete: Glue and Screw with self tapping concrete screws
    Timber: Glue and Screw with suitable timber screws
    Grated Stairs or Grille: Fit with universal saddle clip assembly
FRP SNR fibreglass stair nosing tread profile and dimensions

FRP SCR fibreglass stair nosing tread profile and dimensions

…click to zoom in…

FRP -100 mm

Reinforced FRP R100 stair nosing can be installed to just about any stair tread requiring serious slip protection and highlighting of the step edge.

FRP -R100 is available with a heavy duty silicon oxide grit suitable for use in the most demanding environments

Size: 100mm x 25mm x up to 3600mm long
SC-R products are made to measure – it is a finished product when delivered and can be used immediately

    High corrosion resistance
    Slip resistance
    Light but strong impact strength
    Long service life, low maintenance
    Non-conductive, non-sparking, non-magnetic
    Fire resistance and low thermal conductivity
fixing assembly saddle clip for stair nosing Perth
industrial stair nosing FRP

Reinforced FRP 150 Stair Tread Nosing

Designed to cover part of the stair and to minimise slipping on chequered Plate, Steel. Grated, Concrete or any other slippery surface stairs.

Size: SC-R 150mm x 25mm x 750mm or 900mm, other lengths available on request.

Installation of Stair Nosings

    Chequered Plate / Steel: Glue & Screw with TEK Screws
    Concrete: Glue and Screw with self tapping concrete screws
    Timber: Glue and Screw with suitable timber screws
    Grated Stairs or Grille: Fit with universal saddle clip assembly
stair nosing for mining and industrial
fixing assembly saddle clip for stair nosing Perth
FRP Stair Nosing Perth

Reinforced FRP 230 Stair Tread Nosing

Designed to cover the entire or most of the step. SC-R 230 is available in safety yellow and has a heavy duty silicon carbide anti-slip grit.

Size: SC-R 230mm x 25mm x 750mm or 900mm, other lengths available on request.
stair nosing clip assembly for fixing

Installation of Stair Nosing

    Chequered Plate / Steel: Glue & Screw with TEK Screws
    Concrete: Glue and Screw with self tapping concrete screws
    Timber: Glue and Screw with suitable timber screws
    Grated Stairs or Grille: Fit with universal saddle clip assembly
FRP stair nosing stair tread Perth
230mm FRP Stair Nosing Perth
FRP stair nosing Perth 230mm

SCR Anti-Slip Strips

SCR anti slip strips have been designed to offer lasting slip resistance. They are made from a composite material that is suitable for use in harsh environments;
including, high exposure to salt water. During the manufacture process silicon carbide is incorporated to form an inseparable gritted surface. The strips are available in three standard sizes:

  1. SCR50 = 50MM WIDE
  2. SCR74 = 74MM WIDE
  3. SCR90 = 90MM WIDE

The FRP anti-slip strips are approximately 3 mm thick and taper on both sides. They are available in black or yellow with a silicon carbide anti slip grit finish.
SC-R 50 and SC-R 74 strips comply with the requirements of AS1428.1:2009 Design for Access and Mobility.

SC-R 90 is often used as a ramp slip protection strip. SC-R Anti Slip Strips have been slip resistance tested to AS 4586:2013

SC-R Anti Slip Strips can be used as a standalone stair edge slip protection strip or as a ramp slip protection.

SC-R50, 74 & 90 strips in black offer a variety of standalone slip protection. In addition SC-R 50 and 74 can also be used as anti slip inserts in a variety of aluminum stair tread nosings.

Complete FRP stair treads

Treads are available in either Square Mesh or I-Beam construction, we also offer Mini or Micro Mesh finish on application.
They have a rigid nose for extra strength with a permanent silicon oxide anti-slip grit over the entire tread area.
The complete FRP Stair treads are light in weight but have great impact strength. The FRP Stair tread is a Grating or I-Beam construction with open areas providing a self cleaning function.
High corrosion resistance

    Light but strong impact strength
    Long service life and maintenance free
    Non-conductive, non-sparking, non-magnetic
    Fire resistance and low thermal conductivity

FRP stair nosing clip assembly

Installation

The complete FRP stair treads are made to measure and are easy to install using stainless steel hold down clips that can be attached to the support with bolts, nuts or self tapping screws.

FRP stair nosing Perth
FRP stair nosing Perth
FRP stair nosing Perth
FRP stair nosing Perth