Stair Lighting Step Lighting Theatre Lighting

Stair lighting Gel coated strip for 12 volt stair lighting in theatres

24 volt tubelight in pearl white-your choice of brightness, colours and dimmers

Stair Lighting | Step Lighting | Theatre Lighting

LED STAIR LIGHTING FOR THEATRES

One of the first decisions you need to make when installing LED stair lighting for a theatre is whether or not you want 12 Volt or 24 Volt.

A 12 volt LED stair lighting configuration is different from a 24 Volt LED stair lighting for a cinema or theatre

With a 12 Volt system you can choose how many LEDs per 50mm, and the LED’S coming in a gel coated strip which is easy to install with double sided tape either on the face or underneath the specially designed rebate in the stair tread.
You have a wire attached to the end of the gel strip which then easily attached to your wiring system. We call this wire a mouse tail!

The 24 Volt LED stair lighting system for cinemas and theatres offers you the choice of varied amounts of light. You can choose to have the led’s manufactured at at various spacing’s which will give you a brighter or softer light.
You can also purchase a dimmer which will enable you to dim the theatre lighting.

With a 12 volt system you can use a 50 or a 100 Watt per Power Supply.

The 24 volt LED step lighting system come with a hard PCB circuit [Printed Circuit Board] which is installed by the manufacture in a tube which is then fitted into the stair nosing aluminium extrusion.

With a Hard PCB circuit installed in a tubelight you can specify the LED spacing’s. [ 10 / 20 / 30 ] This will give you a choice of a brighter or lower LED colour intensity. You can choose to dim the lights as well

Clip covers fit over the aluminium stair nosing rebates where the strips are located, and the various colours of led’s with the many colours of the clip covers means you have unending choice of colours.

For example a blue LED strip coupled with a blue clip cover gives you a very rich royal blue colour.

LED STRIP LIGHTING FLEXILED 12 Volt

12 VOLTS DC CURRENT 0.4 AMPS per metre (4.8 watts per metre)
Beam Angle 120 degrees
LED spacing 16.6mm (60 LEDS per metre)
COLOURS

  1. Amber
  2. Blue
  3. Red
  4. Cool White
  5. Middle white
  6. Warm white

Transformer

A DC transformer is recommended to operate these LED’s. We recommend 50VA DC regulated or 100VA DC regulated for larger applications.

Flexiled may be ordered to include a factory fitted . 1 metre figure 8 tail. Additional length may be included.

The maximum length for one flexiled gel strip is 5 metres, but most steps are usually 1200 mm wide.

LED STAIR LIGHTING

stair nosing for step lighting and stair lighting

LED step lights stair lighting Hard PCB circuit LED Inners in any number of colours in Tubelights.

These are inserted by the manufacturer in the tubelights.

The tubelight is designed to house sub-miniature incandescent lamps or Light emitting diodes at various spaces suitable for stairs and aisles

led stair step lighting Perth

PCB LED stair step lighting

Tubelight tube is extruded to specification from UV stabilised polycarbonate.

Colours

  1. Amber
  2. Blue
  3. Clear
  4. Green
  5. Opal
  6. Red.

LED SPACING:
Tubelight LED’s can be selected as 10 / 20 / 30 mm spacing’s
COLOURS

  1. Amber
  2. Blue
  3. Red
  4. Cool White
  5. Middle white
  6. Warm white

RATING:
Ingress Protection IP66 – UV stabilized Silcone Coating
Can supply LED strip lighting in 12V and 24V, and power supplies with Australian Approval to suit.

HANDLING PRECAUTIONS:
An anti-static wrist strap should be worn when attaching tails to avoid LED damage. Avoid reflexing the strip in cold ambient conditions TRANSFORMER:

We recommend R8901 50VA DC regulated or R8992 100VA DC regulated for larger applications.

LED STEP LIGHTS

MATERIALS: Aluminium extrusion with PVC tread insert.

A PVC tread insert comes with each length of aluminium profile. A variety of colours are available:
Light grey, black, light brown, dark brown and red.
LENS:
This product can also be fitted with a polycarbonate lens.
The lens must be ordered as a separate product
R8881-A – Amber lens.
R8881-B – Blue lens.
R8881-C – Clear lens.
R8881-G – Green lens.
R8881-O – Opal lens.
R8881-R – Red lens.

APPLICATION:
Coupled with the R8200 tubelight, r8200 tubelight this product is designed to illuminate stairs.
The aluminium profile can be installed discreetly over carpet and other flooring.
The tubelight fits into the profile, washing light across each stair tread. A tread insert comes with each length of aluminium.

Stair nosing can be coupled with a range of products which come in the 10 x 10 polycarbonate tube, including the L8670 LEDline battery back up unit. It can be installed for emergency and safety lighting applications.

LENGTHS:
The maximum length for aluminium extrusion is 6 metres. The extrusion
lengths will fit together for applications longer than 6 metres.
WEIGHT:
0.930 Kg per metre

Custom Extrusion Finish

  1. Powdercoat
  2. Black
  3. Bronze

LED STEP LIGHTS

R8810 CARPET TO CARPET STAIR NOSING PROFILE

Custom Extrusion Finish

  1. Powdercoat
  2. Black
  3. Bronze

LENGTHS:
The maximum length for aluminium extrusion is 6 metres. The extrusion
lengths will fit together for applications longer than 6 metres.

WEIGHT:
1.008 Kg per metre

APPLICATION:
This carpet to carpet stairnosing profile is ideal for lighting stairways. It is designed to fit to the stair tread before the floor covering is laid.
It provides an attractive and neat finish to the stair tread.

It can be coupled with a range of products which come in the 10 x 10 polycarbonate tube, including the R8200 tubelight and the R8670 LEDline
tubelight. This product is ideal for emergency floor lighting.
A R8940 battery back up unit will ensure the lighting remains operational during emergency situations.
LENS:
The carpet to carpet stair nosing can be ordered complete with a polycarbonate lens. Refer to the table for lens colour options. The lens can also be ordered separately (R8881).

LED STEP LIGHTS

R8200 Tubelight polycarbonate with inners-
Tails are Standard

Tubelight tube is extruded to specification from UV stabilised polycarbonate.

It is designed to house sub-miniature incandescent lamps or Light emitting diodes at various spaces suitable for stairs and aisles

Colours

  1. Amber
  2. Blue
  3. Clear
  4. Green
  5. Opal
  6. Red.

Can be coupled with the R8881 Clip in cover for spectacular step stair lighting in any number of colour combinations

Tails standard size is 1 metre.

LED STEP LIGHTS

Clip Covers

Polycarbonate clip covers are available in many colours.

They can installed on the top of the nosing as clear, opal or colours, and when flexiled strip led lights are attached on the back and then into the face of the profile allows you to have a choice of colours not only underneath the profile, but also at a 45 degree angle on the on the profile itself.

This highlights two sections of the nosing the tread and the riser.
Colours are:

  1. R8881 A Amber Polycarbonate Lens
  2. R8881 B Blue Polycarbonate Lens
  3. R8881 C Clear Polycarbonate Lens
  4. R8881 G Green Polycarbonate Lens
  5. R8881 O Opal Polycarbonate Lens
  6. R8881 R Red Polycarbonate Lens

MOUNTING:
FLEXILED is fitted with 3M brand double sided tape. Peel off the protective layer and attach to a clean, dry, smooth surface

Transformers for cinema lighting

Transformers and power supplies very as to whether or not you have a 12 volt or 24 volt system.
You can also choose to fully pit in a console which can be operated to control lighting system including dimming.